THE BOTTOM LINE IS THAT WE INCREASE YOUR BOTTOM LINE

THE LIFECYCLE OF A VEHICLE HAS 4 MAIN STAGES.

REMAN ADDS A POWERFUL 5TH.

CUSTOMIZE YOUR REMAN BY CHOOSING THE STEPS THAT ARE THE BEST FIT FOR YOUR BUSINESS.

ASSESS
The intake assessment allows us to verify the requirements envisioned during the photo assessment and discussions with fleet personnel. For running and driving units, a road test adds to the lift inspection that produces a revised intake assessment and final quote.
RECOVER FLUIDS AND WASH
Once the scope of work is defined, we recover refrigerant, lubricants, and fuel as required to protect the vehicle and personnel. The unit is then cleaned to perform the REMAN services.
TEAR DOWN
Many times, separating the cab from the chassis is advantageous to add value to both. This often reduces the overall time required since the chassis components are easily accessed.
POWERTRAIN
The engine, transmission and gearbox are removed and replaced; they are linked to the VIN and supported by the nationwide dealer network. Differentials are most often inspected and serviced but replaced if needed.
SUSPENSION
Similar to powertrain, suspension components including steering gears and brakes are removed and replaced. Springs are inspected and replaced if needed; wheels and tires are replaced as required.
MECHANICAL
The AC compressor, condenser and evaporator; along with the heater core, blower motor, and associated hoses are replaced in this step. Power steering and water pumps are addressed here along with the starter and alternator.
INTERIOR
While chassis work progresses, items like seats, the steering wheel, the dash, door panels, door seals, weather-stripping, the headliner and flooring are repaired or replaced as needed.
PAINT, BODY, AND GLASS
As the last cab step, dent / ding repair, primer and final paint combine with glass replacement combine to finish the exterior work.
REASSEMBLE
With all cab and chassis work completed, the two are put back together. Any specialized service body or upfit items are completed in this step.
QUALITY INSPECTION AND ROAD TEST
Once aligned, a road test, drive-cycle miles, and quality inspections complete the reman process.